• Dutco Tennant LLC, PO Box 233, Dubai, U.A.E.

A plumbing product is any device that is connected to a plumbing system and interacts with water. Each plumbing feature will be designed for a particular use, and while design can vary, fixtures generally are designed with one function in mind. Pipes and drains are part of a home’s plumbing system which supplies water to each of the plumbing fixtures and also drains it away. Normal plumbing practice is to install a valve on every water supply line leading to the fixture, and is commonly called the “water supply valve” or “stop valve”. The water supply to some fixtures is only cold water (such as a toilet), and some plumbing fixtures have both a cold and a hot water supply. The water supply valve is intended as a safety feature. If a plumbing fixture breaks or leaks, the water supply valve can be closed to stop unwanted water from accumulating and causing damage.

To turn the water supply off, the stop valve should be spotted which is usually found on the flex, or feed pipe leading into the fixture. It should be turned clockwise until it stops. If you cannot locate a water supply valve, you may need to turn the water off at the main. This valve is typically located in front of the house just below the garden hose faucet. Sometimes the main is located in the water meter box, usually underground near the street. A street key is required for access, so you may need to call your local water department or our friendly staff at All About Plumbing for assistance. To extend the life of plumbing products, they must be kept clean, it must be ensured that the water pressure is checked by a master plumber only.

Plumbing is any system that conveys fluids for a wide range of applications. Our product caters to the Residential, Commercial, industrial sector like Hotels, Shopping Malls, Schools, Office Buildings, etc. Our Standard products include pipes, valves, pipe supports with specific material of Construction to suit the Project requirements can also be provided.

Plumbing Specialty products include the Air vents, BackFlow preventers, Water Hammer arrestors, Control Valves, drains, steam traps, hose bib, link seal and Expansion Joints.

These products are offered across GCC Countries in collaboration with Global Manufacturers which are well established and known for their quality in this industry for many years with a clear vision to Provide solutions than just products.

Gate Valves

Gate Valves

Butterfly Valves

Butterfly Valves

Ball Valves

Ball Valves

Check Valves

Check Valves

Strainers

Strainers

Flexible Joints

Flexible Joints

Pressure Reducing Valve

Pressure Reducing Valve

Pressure Relief Valve

Pressure Relief Valve

Float Valves

Float Valves

Temperature & Pressure Relief Valves

Temperature & Pressure Relief Valves

Thermostatic Mixing valves

Thermostatic Mixing valves

Double Check Valve

Double Check Valve

Water Hammer Arrestors

Water Hammer Arrestors

Drainage Products

Drainage Products

Pipes & Fittings

Pipes & Fittings

Plumbing Pipe Supports

Plumbing Pipe Supports

Steam Traps

Steam Traps

Angle Valve

Angle Valve

Hose Bib

Hose Bib