Hygienic FRP Wall Cladding – Improve hygiene and durability with stylish finishes
The current global pandemic situation triggered by COVID-19 has led to the world to provide a more in-depth focus on the hygiene and cleanliness of ourselves along with our surroundings. Among several negativities of this present situation, what have actually immerged as a small ray of positive vibes is that there is so much less pollution now, nature is back and most importantly the entire world is focusing on the hygiene and cleanliness.
In essential places like hospitals, laboratories, and public kitchens, it becomes very much important to provide concentrated attention to the cleanliness and hygiene factors. As these are sensitive areas that are visited by numerous people daily from various backgrounds and many lives are dependent on these places. A great solution to increase cleanliness and hygienic environment in these places are by installing Hygienic FRP Wall Cladding. Now, what are these FRP Wall Panels and why should you use them? Let us break it down for you. Walls and ceilings are the most common areas in any facility where dust, bacteria, and viruses can remain and this makes it important to provide a protective layer over them. FRP or Fibreglass Reinforced Plastic (FRP) is a composite material system consisting of a plastic resin matrix, glass fiber reinforcement, and other additives. It has several astounding properties when it comes to strength and weight ratio and acts as the best choice compared to traditional wall protection layers. They do not shatter and provides high chemical resistance. FRP Wall Cladding permits higher design flexibility which was not possible previously due to the limitations of traditional building materials. These sheets can be installed by using adhesive and can be laminated to a wide range of substrates for modular installation or cut into ceiling tiles. They provide the ideal solution where a high impact, hygienic, easy to clean surface is required. FRP is renowned for being strong, non-corrosive, lightweight, and maintenance-free. They can be erected efficiently and economically.
We at Dutco Tennant LLC supply the exceptional Hygienic FRP Wall Cladding range from CRANE Composites to the Middle East. They are the world’s leading manufacturer of premium Hygienic Wall Cladding and Ceiling tiles made from FRP. Crane Composites FRP wall panels combine expertise in composite material science, process, and technology with a deep understanding of End-user needs to deliver innovative products that outperform traditional building material such as Ceramic, Paint, PVC wall cladding & Acrylic panels, metals and woods. Their extreme lightweight and composite range deliver unsurpassed strength, Hygiene, and durability because of its superior sanitary features that include – resistance to mold, mildew, bacteria growth, high impact strength, high moisture resistance, chemical resistance, will not rot or corrode, stain resistance, sanitary finish, low maintenance cost, and easy installation. They meet the requirements of USDA/FSIS (The Food Safety and Inspection Service) and are available in Class C and Class A fire rating for flame spread and smoke development when tested as per ASTM E-84 and it is Dubai Civil Defense approved (DCD) for both Class A and FM Global. It is also known for GREENGUARD “Children & Schools” and GREENGUARD “Indoor Air Quality” certification. Crane has continued to pioneer numerous patented technologies in the FRP industry and provide today 3 brands: Glasbord®, Varietex® and Design® for both Back of House (BOH) and Front of House (FOH) application in both industrial and commercial facilities
Install them today for your facilities and enjoy high levels of hygiene, safety, and durability with stylish finishes at the same time. Contact us for more information.
Dutco Group supports the Community Solidarity Fund Against COVID-19 with a contribution of AED 15 million
Our country along with the entire world is currently facing a huge crisis due to evil named COVID-19 which has disrupted all of our lifestyles and fell like a big thunderbolt. There is unfortunately till date no certified antidote for this virus but the entire world is trying their best to come up with one as soon as possible. According to experts the only way to stay safe is by maintaining social distance and staying home. Though most of us should feel fortunate to be able to stay at our homes and enjoy a break from our hectic lives with our family, spending our time doing activities which we always loved to do but couldn’t manage time but this lockdown has not proven to be a blessing for everyone.
There are plenty of people who have lost their jobs, are stuck in places, don’t have access to essential food supplies and are away from their families. Again no matter what may be the situation is, there are frontline workers who are associated with healthcare, essential service and various other important sectors who need to go out to their workplaces to keep us safe and running. Dutco Group believes that it is now time for us to support these real-life superheroes with everything we can do. We have pledged to support the Community Solidarity Fund Against COVID-19, launched recently by the Islamic Affairs and Charitable Activities Department in Dubai, with a contribution of AED 15 million. It is our humble and small effort to support and respect the efforts made to contain the COVID-19 outbreak and its health, economic and social repercussions. Our contribution to the cause is the second largest financial contribution since the launch of the fund and we feel highly motivated to be appreciated by H.E. Dr. Hamad Sheikh Ahmed Al Shaibani, Director-General of the Islamic Affairs and Charitable Activities Department in Dubai. He expressed that the fund is helping to create new channels of cooperation between the private sector and government entities, which greatly support the efforts to safeguard the health, safety, and wellbeing of the community during this challenging period.
Ahmed AbdelRahim Baqer, Chairman of the Dutco Group Board said: “Our leadership has taught us that charity is inherent to the ethos of our country, as part of which it extends humanitarian support not only locally but also globally. Our contribution reflects our deep commitment to our national duty and shared social responsibility.” He also stated that in this challenging time, each individual has a responsibility to support social efforts and he hopes that the cooperation between all segments of society will help mitigate the situation. So far the Emirati experience in containing the virus is a positive one that clearly reflects the spirit of solidarity between the private and public sectors.
Dutco group praises all the efforts of the front line workers who are working ferociously for battling the ongoing crisis and helping us to stay safe and healthy. We are closely monitoring the situation very closely with regular updates and will try our best to provide the necessary support to all those in need.
COVID-19 has created an unparalleled situation of highly contagious infection and a high mortality rate. The Pandemic has also created a high level of stress in even healthy individuals due to fear of contracting the virus or due to being forced to stay at home and practice social distancing. The entire world is struggling to come to terms with the realities of the current emergency and that makes it very important for all of us to contribute in these difficult times in whatever way we can. More than 2 million people are infected globally with over 160,000 fatalities and growing.
Being a solution provider for more than four decades with our services in establishing pathogen testing laboratories, we Dutco Tennant / BCL coming forward to work with the government and private medical entities, contractors and consultants in giving them a hand in meeting high-throughput sample testing. DUTCO/BCL offers a wide range of products/solutions in establishing new COVID-19 testing laboratories with our renowned suppliers.
Here is a list of COVID 19 Testing Laboratory equipment that we supply:
COVID 19 Extraction Booth (Walk-in Booth), Korea KIYON, Korea
This is the perfect solution that makes it faster, reliable and easy to collect virus & harmful pathogen test specimens from suspected patients. It can be used at essential public places that attract high footfall every day like Airport, Hospitals, Government Facilities, and Virus Testing facilities, etc and can provide extensive advantages for both the Medical Staff and the Public.
Real-time PCR, Techne UK
This Real-time PCR system is a new, high specification, economically priced real-time thermal cycler from Techne features the highest thermal block uniformity and the fastest run time of any block-based qPCR system on the market. It helps researchers to bring run times for an optimized 40 cycle reaction down to only 15 minutes.
DNA/RNA Extraction system, PSS Europe GmbH, Germany
This highly precise, easy to use, benchtop instrumentation for fast, low-cost nucleic acid extraction offers faster, cleaner and more efficient magnetic bead extractions for high-purity nucleic acid recovery. PSS has developed the unique Magtration (magnetic filtration) technology to optimally separate magnetic beads in a fully automated workflow. It is very compact and frees up extra space.
Multichannel Pipetting Robot (Assist Plus), Integra Biosciences Switzerland
Modern laboratories increase throughput with Multichannel pipettes. But prolonged manual pipetting takes up precious time and can lead to repetitive strain injuries. ASSIST PLUS pipetting robot streamlines routine pipetting tasks at an affordable price. Using electronic multichannel pipettes, the system automates pipetting tasks, eliminates physical strain and ensures superior reproducibility and error-free pipetting.
Biosafety Cabinet, Bioair Italy
The new Class II (type A2) Microbiological Biosafety Cabinets SafeMate EZ series includes premium features in an entry-level priced cabinet. The “V”-shaped antiobstruction grill allows working without worrying about armrests, while the self-positioning electrically operated front sash makes sure that the front aperture is always at the right size for comfort and safety.
Nano spectrophotometer, Jenway UK
This Genova Bio is a simple, low cost, easy to use UV/visible spectrophotometer that is dedicated to life science applications. The fast, responsive color touchscreen and pre-programmed methods for the measurement of nucleic acid concentration and purity, protein assays and cell density, make this spectrophotometer the ideal addition to any laboratory.
Freezer / Refrigerator, Pol-Eko, Poland
This Laboratory Freezer is highly recommended and ideal for long-term storage of samples and biological material for research, storage of easily decomposing material (e.g. solid-state), freeze resistance tests (e.g. of building materials: concrete, wood, etc.), pre-freezing, plasma storage. It comes with LAN, USB ports for data transfer, multi-segment time and temperature programs, visual and sound alarm and more.
Bunsen, Fireboy, Integra Biosciences Switzerland
Bunsen Burners are conventionally used widely as standard equipment for routine flame sterilization work but a huge risk factor lies within. The FIREBOY Portable Safety Bunsen is a safe alternative as it not only prevents the danger of gas leaks but also reduces the risks of fire or burns if unintentionally left on.
Autoclave, Priorclave UK
We have several models of AUTOCLAVES / STERILIZERS available with us. The Top loading variant is very popular internationally and in for life-science research. All models include the most current version of our full-featured, fully-programmable Tactrol Control System. They easily accommodate the tallest flasks, fermentors, and bioreactors, they’re also excellent for waste processing, especially in large batches.
Glassware Washer, Smeg Italy
Available in several sizes to suit the requirements. Available in 60cm width or 90cm width or free-standing and double door options for large throughput. It can wash up to 95°C – antibacterial thermal disinfection. It has a peristaltic pump for liquid detergent and acid liquid neutralizer. The washing chamber and internal door in AISI 316L stainless steel.
Dutco Group believes that by empowering the health officials who are working without any break every day to keep us safe and fine will only lead us to overcome this ongoing situation. We have made small efforts by supporting them with a contribution of AED 15 million to the Community Solidarity Fund Against COVID-19 and we are trying our best top further help the needy with everything we can.
Contractors need to give special attention to the fire safety during any construction phase. A sudden fire accident can hamper a business in several ways and can make it completely paralysed. Any business deals with several objects but most important every business have several human lives involved and fire safety is extremely important for them. You may think that your organization’s fire safety plans have been made with extreme care, but it is still not enough. At any time, an expected fire hazard can break-in, and you cannot predict that when that will happen but what you can do is stay alert and keep yourself safe and sound by installing the best in class fire safety equipment. With Dutco Tennant LLC, you will always get the most advanced range of firefighting solutions in the Middle East and GCC region.
For any fire mishaps, firefighting equipment works as the main line of defense. Dutco Tennant LLC has been the leading supplier of several firefighting products in the Middle East and GGC region and always cares about your business or residential fire fighting equipment. We are known all over for our ability to respond at a very short time to a hazardous situation. With us, you will only get the most highest-rated, highest quality firefighting products from the biggest brands of the industry. We ensure to feature only the products which are designed using the latest technological advances, innovations, and materials that have been certified to meet or exceed regulatory standards.
Our products have been subcategorized into several divisions, which are as follows –
Sub Stations & Power Plants
There are several risks of fire in Substations and the possible impacts can be catastrophic. A fire breakout in substations can severely impact the supply of power to customers and affect the company’s revenue and assets. Similarly in a power plant, there are several risks underlying which can cause a fire or an explosion. But in order to overcome all of these you need to use a wide range of superior fire-fighting products which are suitable to help you to keep yourself safe.
Our offered products – Fire Water Tanks, Valves, Fire Hydrants, Indicator Posts, Pipes & Fittings, Grooved Fittings, Pipe Supports, Mineral Insulated Cables.
Every year fires affect thousands of facilities which results in injury and building damage. Fire is undoubtedly a serious threat to the safety and security of any building and fire safety primarily targets to eradicate loss of life and property damage by installing & maintaining reliable fire safety equipment. Buildings need to be installed with fire extinguishers, fire sprinkler systems, fog nozzles, hydrants, firewater storage tanks, and other fire protection products to help surpass fire hazards. From Dutco Tennant LLC, you will easily be able to get all the types of fire safety products for buildings.
Our product range – Sprinkler Heads, Sprinkler Flexible Hose & Fittings, Pipes & Fittings, Valves, Grooved Fittings, Pipe Supports, Mineral Insulated Cables, Modular Wiring Systems, Expansion Joints, etc.
Infrastructure & Pumping Station Networks
A firefighting pumping station is a key element of fixed water fire extinguishing networks. Combined with a storage tank or water supply system, it constitutes the sources of water. the network of firefighting is made up of a water source that is followed by firefighting pumps, pipes to carry water to the destination points, pipeline accessories like expansion joints, dismantling joints, and flange adapters for mounting the valves on to the network along with associated fire hydrants, valve chambers, washout chambers, and air valve chambers. Dutco Tennant LLC can supply the specialist expertise to help meet your performance objectives.
Our product range – Fire Hydrants, Indicator Posts, Valves, Strainers, Flow Meters, Pipes & Fittings, Pipeline Accessories.
Industrial Units, Warehouses & Fuel Stations
it is very important for a proper water flow in a fire emergency situation. For that, sustaining life and protecting property is imperative and of utmost concern. Because of that we supply fire protection control valves which are designed to work at emergency full-flow. Several businesses across the Middle East have put their trust on or complete line of performance listed and approved valves.
Products in this category – Fire & Potable Water Tanks, Fire Hydrants, Valves, Pipes & Fittings, Sprinkler Heads, Sprinkler Flexible Hose & Fittings, Grooved Fittings, Pipe Supports, Mineral Insulated Cables.
Dutco Tennant proudly provides high-quality firefighting products and solutions for industrial buildings, warehouse applications and special hazard areas like fuel stations with a goal to help maintain the productivity of our customers by keeping all life safety systems running properly and production systems working efficiently.
Reverse Osmosis is a certain type of water filtration method which utilizes a thin, semi-permeable with small pores for allowing passage of water while rejecting larger molecules of dissolved salts and other impurities like bacteria. It is a very effective water treatment process for producing highly purified drinking water systems, industrial boilers, cosmetics, seawater desalination , pharmaceutical production, food and beverage processing and several other applications.
Working principle –
Reverse Osmosis is a continuously operating water treatment technology that uses pressure for passing source water through a thin membrane and with that separates the impurities from water. RO works on the opposite principle of osmosis, the natural tendency of water with dissolved salts which is to flow through a membrane from lower to higher salt concentration. This process is found throughout nature and is also used by plants for absorbing water and nutrients from the soil. In the anatomy of humans and other animals, the osmosis process is also used by kidneys for absorbing water from the blood. In an industrial RO system, for overcoming natural osmotic pressure, pressure usually from a pump is used which forces the feed water with its load of dissolved salts and other impurities through a refined semi-permeable membrane that removes a high percentage of the impurities and ultimately produces a highly purified water.
In conventional commercial industrial applications, 75% of the feed water is purified whereas, in the applications in which water conservation is important, 85% of the feed water is purified.
Reverse Osmosis Membranes –
A reverse osmosis system is built around several membranes. Each membrane is a spiral wound sheet of semi-permeable material. membranes are available in several sizes like 2-inch, 4-inch, and 8-inch diameter and among them, the 4- and 8-inch diameter sizes are the most commonly used in the industry. As a standard length, 40-inch has been set by the industry for allowing membranes from different manufacturers interchangeable in equipment systems. In the beginning, the construction of semi-permeable membranes was conducted by using cellulose acetate but later on, the industry primarily shifted to use a thin film composite (TFC) being placed on top of a stronger substrate.
Advantages of RO –
- Simple operation
- Easy to install because of the modular design
- No requirement of hazardous chemicals
- Reduced use of water and sewage costs
- Highly Energy efficient
- Can easily be integrated with an existing membrane filtration system or ion exchange system for obtaining around 80% rinse water cycle
So, when you can obtain so many advantages from RO, why not use it up for your water treatment projects? As a leading supplier of quality water treatment plant components in the Middle East and GCC region, Dutco Tennant LLC can provide you with the most state of the art range of Reverse Osmosis Membrane. With us, you can also get Fully automatic Brackish water and Seawater RO plants in skid Mounted/ Containerized Configurations.
What is carpet flooring? Well it is a soft floor covering that is made up of bound carpet fibers, typically consisting of an upper layer of pile attached to a backing. Carpets are traditionally meant to be used indoors and they are suitable to be used in both high and low traffic areas. They can last up to several years without being needed to be replaced. They have been offering a right mixture of safety, comfort, performance and aesthetic pleasure. Now you may feel that carpets are only required to notch up the beauty of your interiors but they offer many more solutions than that. So, what are they? Let us break down below.
- Appearance and Style – Let us begin with the most common usage of carpet that is adding to the overall décor with its several colors, patterns, and pile heights option. With carpet flooring, you can create the look you want to have in your home and business. Carpets are found with several colors, patterns and design options which can certainly fulfill the style statement.
- Insulation – Being an essential contributor to the insulation of the indoor environment, carpet can help you to save energy. It provides a psychological feeling of warmth by insulating the floors.
- Acoustic – Reports have suggested that carpets can absorb sound and the one having padding can further enhance this ability.
- Health – Dust, allergens and other contaminants can get trapped in carpet, and it holds them until they can be properly removed.
- Safety – With carpet flooring, you can keep yourself safe from slipping and falling and the injuries related to them especially on hard surface floors.
- Easy to maintain – Carpeting is comparatively much easier to clean and maintain than hard surface floors and this cuts down maintenance cost by notches.
- Cost Savings – IICRC suggests that carpets cost much less over time than hard surface floors for the complete process of buying, cleaning and maintenance.
- Sustainable – Carpet flooring is highly sustainable and can last for a long time.
With all these all-round benefits, why are you still hesitating to take up carpet flooring for your facilities? Allow Dutco Tennant LLC, to help you out further.
We have superior carpet flooring solutions that can add elegance to the interior of your house at a very reasonable price. We supply products that have only A+/A rating and are Green certified. They all are made from 100% nylon on the yarn portion. Dutco Tennant’s carpet flooring solutions comprises of Carpet Tiles, Broadloom Carpet, and Prayer Room Carpet which all are designed to give you an eye-catching look to the interior of your house and office and satisfy the endless requirements of house owners and business owners. We are here to provide standard and comfortable carpets that can serve different needs.
We have been providing prayer room carpets for all around Dubai and Gulf regions, and our commercial carpets are comfortable to sit and walk on. Our products can be supplied quickly and undergo faster installation.
The world is currently going through a dark phase that has put the entire world into a standstill. With the breakout of COVID 19 several lives all over the world is facing a massive threat to life. All over the world scientists and experts are working day and night to find out a suitable antidote for this and hopefully, we will enjoy a suitable solution soon. Now, it is an undeniable fact that to stop the gradual spread of this virus, the world needs to perform more and more rapid tests to detect potentially affected personnel and send them to quarantine. Just a few months ago, this test was a very lengthy process which was very time consuming and also affected the delay of results. But now we have an amazing solution which makes the test process, faster, easier and reliable.
Dutco Tennant LLC brings to you the Bi-directional Walking Through Booth. This “walking through” testing station looks just like a public phone booth and it can be used for testing the traces of the virus in suspected patients. In areas such as the airport, hospitals, government facilities, and others, every day thousands of people from various backgrounds and areas visit. And this makes it very much important to have a complete check of them to ensure that they are not carrying any trace of COVID 19. The testing can be done very easily on this booth, all it requires for the suspects to walk into the booth and have their sample collected by the medical staff who is standing on the outside of the booth. This can also be used inversely where the medical staff will be standing inside the booth and the patients are standing outside and this makes it bi-directional. The test can be completed in just 1-minute!
The booth has a filtering facility and a fan system that prevents the spread of the virus and offers clean air flow circulation in the booth. This also makes it very easy to complete the post-sterilization process. The Glovebox technology allows medical staff to collect the samples without even wearing a PPE. The booths can be maintained in positive pressure, as well as in a negative pressure state, meaning they can be used anywhere, whether it be indoors or outdoors.
- 2 port bidirectional Negative or Positive pressurized Sample Virus Extraction Booth
- Dimension: 1000(W) X 1000(D) X 2,500(H)mm
- Filter Case
- 1 pair of Chemical resistance Glove
- LED Lighting
- HEPA Filtering System
- Positive or Negative Pressurized Setting
- Expandable/Modular Model
- Bi-directional intercom
- Designed with High-Class Glovebox technology
- Offers IPPE(Personal Protection Equipment) Level Protection
- Faster sample extraction
- Filtered clean air-breathing for medical staff and reduced staff exhaustion
- Positive or Negative pressurized setting
- Ample space for elderly people
Get them today from Dutco Tennant LLC, and start using it to perform rapid tests. With these little steps, together we can fight off this evil.
ARABLAB is a reputed trade show for the global laboratory and analytical industry in which more than 1000 exhibitors from over 100 countries meet the thousands of buyers and showcase to them their latest innovations for Science and Technology. It consistently attracts global buyers, investors and laboratory professionals from a host of different industries like agriculture, robotics, biotech, and food testing. Every year Dutco Tennant LLC upgrades its range of products to meet the ever-increasing market demands and participates in ARABLAB for showcasing its latest innovation to the visitors.
JEOL Group of Companies has been conducting business in mainly three segments which are Scientific and Metrology Instruments, Industrial Equipment and Medical Equipment. Analytical and scientific instruments are important tools that are indispensable for the development of science and technology as well as manufacturing. Their exceptional product range is known all over the world and Dutco Tennant LLC are the proud suppliers of this exceptional product range in the Middle East and GCC region. At the 2020s edition of ARABLAB, our experts will be talking about the newest line of Sample Preparation & Microscopy solutions.
JSM-IT500HR InTouchScope Scanning Electron Microscope
The newest addition to JEOL’s InTouchScope Scanning Electron Microscope series, the JSM-IT500HR can increase your productivity with our fully-integrated software, from specimen navigation to analysis to report creation. This cutting edge SEM along with its high brightness electron gun system can provide amazing high-resolution imaging along with high sensitivity and high spatial resolution analysis at faster speeds.
- Zeromag and high-resolution imaging
- Element analysis in a flash
- High-speed mapping and long acquisition analyses
JSM-7610FPlus Schottky Field Emission Scanning Electron Microscope
The highly acclaimed optical system of the JSM-7610F has been updated which achieves better resolution (15 kV 0.8 nm, 1 kV 1.0nm), and is now available as the JSM-7610FPlus. The Semi-in lens type objective lens and high power optics of the irradiation system deliver high-spatial-resolution observation and stable analysis capability. Adding to that, the JSM-7610FPlus can be equipped for satisfying a variety of user needs, including observation at low accelerating voltages with GENTLEBEAM mode, and signal selection using r-filter.
- Semi-in Lens Objective Lens
- High Power Optics
- In-lens Schottky Electron Gun
- Small Probe Diameter, Even With Large Probe Current
JEM-ARM200F NEOARM Atomic Resolution Analytical Electron Microscope
The JEM-ARM200F comes with JEOL’s unique cold field emission gun and a new Cs corrector which compensates for higher-order aberrations. The combination of a Cold FEG and ASCOR enables atomic-resolution imaging at not only 200kV accelerating voltage but also at low voltages of 30kV. The system is also equipped with an automated aberration correction system that incorporates JEOL’s latest aberration correction algorithm for automatic fast and precise aberration correction.
- New ABF (Annular Bright Field) detector system
- Perfect sight detector
- Viewing Camera system
JNM-ECZR series FT NMR
The new research system ECZR NMR Spectrometer fully incorporates the newest digital and high-frequency technologies in a more compact size made possible by incorporating advanced integrated circuits, it supports even greater expandability options than current models for multi-channel operation, high power amplifiers and other accessories.
- Highly Precise Digital Control
- High-Performance DDS
- Smart Transceiver System
ARABLAB is one of the most influential exhibitions in the field of laboratory and instrumentation in the world. Since the very first edition, ArabLab has been representing a whole bunch of industries like chemical engineering, agriculture, robotics and more by attracting a wide number of international visitors. The tremendous growth in this highly dynamic industry has made this trade fair to be counted among the most important events of its kind in the UAE. Dutco Tennant LLC being a highly decorated supplier of exceptional industrial and engineering products in the Middle East always takes advantage of this tremendous opportunity for showcasing its exciting new product to the visitors.
Being an ultra-precision technology company, Taylor Hobson operates at the highest levels of accuracy within the field of surface and form metrology. With them, clients can get contact and non-contact measurement solutions to the most demanding applications on a global basis. They always keep themselves up to date with the latest technological innovations to cater to the ever-increasing demands of the industry. Dutco Tennant LLC supplies the exotic product range of Taylor Hobson in the Middle East and at the 2020s edition of ARABLAB, we invite you to have a look at some of the finest Material Testing equipment.
The surface profilometers from Taylor Hobson can measure surface finish, 2d & 3D form, surface roughness, step-height, diameter, angle, contour inspection, precision optics, cylinder heads and blocks, gears, sheet metal, shop floor applications. Their Form Talysurf PGO NOVUS is the most superior equipment for surface finish, contour, 3D and diameter measurement.
Roundness & Form Measurement Equipment and Testers
A vast product range for measuring Roundness and Form are available from Taylor Hobson.
- TALYScan 280 – Non-contact, optical 3D form measuring system. It has been designed for delivering high accuracy measurements of injectors, hydraulic components, lens barrels, roller bearings, precision bores, etc.
- Multi-part High Precision Roundness – This newly introduced inspection concept, combines roughness, roundness, and contour on a completely automated inspection system which reduces the number of inspection operations.
- High Precision Roundness – The roundness/cylindricity measuring instruments enables sub-micron analysis of precision components in a completely or semi-automatic CNC operation which can be used in the inspection room, Calibration laboratory or shopfloor.
- Large Capacity Roundness – The large capacity roundness systems are specifically designed for coping with the form measurement of large components and regardless of diameter or weight this range maintains roundness and accuracy.
- Shop Floor Roundness – This robust bench mounted shop floor roundness measurement system is designed for fast accurate form measurement and quality control in the high volume production environment.
Taylor Hobson offers the first and only ICP-OES spectrometer that is available with a complete set of factory methods. It can be used for the measurement of roundness and surface finish of Cylinder Heads and Blocks, the stresses and strains exerted on a piston, sub-micron roundness measurement of Fuel Injectors, the surface finish of Panels and Fascia and others.
Arablab is termed as the world’s most influential exhibition for the division of laboratory and instrumentation. Due to the tremendous growth in this dynamic industry has made this trade fair to be counted as the most important event of its kind in the UAE. It works as an amazing platform for companies to showcase their latest products and each year over 1000 exhibitors from over 100 countries come to exhibit their products to more than 10000 buyers. Dutco Tennant LLC being a responsible supplier of quality Laboratory solutions, always looks forward to updating its product range to meet the ever-increasing market demands. And at ARABLAB, we plan to bring forward our latest innovations for the visitors.
Our partner, Revol Software is a rapidly growing provider of process-based business management software solutions in a cloud environment. The company was founded by a group of professionals having more than fifteen years of experience in various industries like distribution, services, manufacturing, laboratories, Informatics, etc. It allows companies for managing core key business operations in a single system that includes Enterprise Resource Planning (ERP), Customer Relationship Management (CRM), Human Resource Management (HRM), Accounts & Finance and Laboratory Information Management System (LIMS). At this year’s ARABLAB, Revol Software will be demonstrating its exceptional Informatics Solutions. So, let’s have a look at their exceptional product range.
The Revol LIMS software is termed as a single solution for the entire lab. This cutting edge solution is custom made to manage the complete laboratory information of an organization into one system with complete data integrity and compliance to regulatory requirements. This laboratory information management system is a completely web-based system and easy to deploy, maintain, upgrade, and integrate into enterprise business systems.
Key Benefits –
- Process Automation
- Instrument Integration
- Interfaces with enterprise, accounting and production systems
- Barcoding and Labelling
- Easy Intelligent Reporting and Data Retrieval
- 60% reduction in turnaround time.
- 25% more analyses.
- An empty customer complaints register, a reduction of 100%.
- Escalation Management
Revol Instrument Integrator
The state-of-the-art instrument connectivity of the Revol Instrument Integrator enables to the integration of instruments easily and quickly. Revol LIMS software can easily connect most of the laboratory instruments straight out of the box with a powerful configuration tool and retrieve data from several file formats.
Key Benefits –
- Instrument Automation
- Interfaces with LIMS Software, ERP systems
- Easy Intelligent Reporting and Data Retrieval
- Complete Audit Trail – Easy data tractability
- Real-Time Dashboards – Real-Time Decision making.
- Configurable E-Mail Services – Email notification for various activities
Revol Intelligent Reporting
Revol Intelligent Reporting is an exceptional embedded analytics and visualization platform. It helps users to create and customize reports without involving a developer. This amazing software makes it fast and simple to integrate beautiful reports and dynamic dashboards into your application. The browser-based reporting environment lets users make simple customizations in seconds, without IT and without formal training.
Key Benefits –
- 100% Web-Based Report Designer
- Interactive Report Viewer
- Supports SQL Server, Oracle
- Rich Reports and Dynamic Dashboards
- Great Looking 3D Charts, Flexible Grids
- Summaries, Subtotals, Calculations, Formats
- Flexible & Dynamic Smart Filters
- Interactive Linking & Drill-Down
- Exports to All Popular File Formats