• Dutco Tennant LLC, PO Box 233, Dubai, U.A.E.
Threaded Flexible Connectors Plumbing Products

Made up of a High-Class range of NBR or EPDM Rubber threaded flexible connectors are double or single sphere based upon the movements which are needed to be accommodated completely with Zinc Coated Flanges PN10/PN16/ANSI150.

Primarily, there are twofold uses of the flexible connectors which are for extending the life of the system of piping by relieving the hydraulic shock which was created when a pump that is submersible turn on or when a nozzle for fuel dispenser is clicked by the consumer when the tank is being topped off and for facilitating connections of pipes. The rigid variants of the fiberglass-reinforced plastic pipe offer themselves for the use of the flexible connected as the pipes are rigid. Threaded flexible connectors play an amazing role for the systems of fiberglass piping for offering a common connection towards the shear valve along with the submersible pump for reducing the stress of pipes by absorbing the hydraulic shock along with the ground movements. They also help the contractors during installation. The flexibilities are important for offering the maximum life inside a plumbing system. For all of the pipes which are connected to rotating equipment for reducing the noise transmission along with the vibration, flexible connectors must be installed. For eliminating the stress inside the piping systems for thermal movement of the piping along with misalignment, they can also be used. Of the double or single sphere molded configuration of joint, the Neoprene-based flexible connectors should be there and they must exceed or meet the specifications of the rubber expansion division or exceed them. The connectors of types FTC, FC. KMA and KWA should be made up of molded reinforced EPDM with nylon tire cord and must have mild steel floating flanges with union ends of female. The V-loop connectors and model BFMC must be made up of bronze stainless steel flexible bellows having stainless steel braided outer cover and must be made up of end fittings of carbon steel.

If you are looking for threaded flexible connectors in the Middle East, then you can find the finest range of products rightly delivered by Dutco Tennant LLC. They are designed to offer the best-in-class performance for all your plumbing project requirements.


  • Available in Screwed BSP Taper BS21 (ISO 7/1) or NPT (ANSI B1.20.1)
  • EPDM/NBR Body
  • Galvanised Malleable Iron Union Ends
  • Nylon Cord Fabric with Steel Reinforcement

Technical Data

Max Pressure 16 Bar
Working Temperature

-20°C to +100°C EPDM

-20°C to +80°C NBR