Gate valves are broadly used for all types of applications and are suitable for both above-ground and underground installation. Gate valves are designed to be used in fully open or fully closed service. They are installed in pipelines as isolating valves, and should not be used as a control or regulating valves. The operation of a gate valve is performed by doing either clockwise to close or clockwise to open the rotating motion of the stem.
A butterfly valve is a quarter-turn rotation motion valve that is used to stop, regulate, and start the flow. Butterfly valves are easy and fast to open. A complete closure or opening of the valve is provided by a 90-degree rotation of the handle. Butterfly valves possess many advantages over the gate, globe, plug, and ball valves, especially for large valve applications. Savings in weight, space, and cost are the most obvious advantages.
A non-return valve allows a medium to flow in only one direction. To ensure that a medium flows through a pipe in the right direction, a non-return valve is fitted where pressure conditions may otherwise cause reversed flow. The flow through the non-return valve causes a relatively large pressure drop, which has to be taken into account when designing the system.
Pipes are allowed to be installed and connected or joined where necessary and terminated in the right place by pipe fittings. Ductile Iron Pipes and Pipe Fittings go hand-in-hand. As pipes are used for various residential, public and industrial applications, so are pipe fittings. Without the use of proper fittings and flanges, no pipes can be connected.
HDPE Fittings are the most economical type of fittings used in HDPE pipes. These fittings are joined with HDPE Pipes by the butt fusion method. Best and Strong Joint depends on various factors like proper heating temperature, heating time, changeover time and correct pressure, etc.
Mechanical water meters are known for their durability, sturdy construction, and accurate results. They feature a dry dial, magnetic drive, vacuum-sealed register for clear reading in the longer run, high sensitivity, low-pressure loss, and has interchangeable spare parts for easy maintenance.
Static water meters come with no moving parts to wear and tear and are completely maintenance-free. The sensor body has a straight-through design with no blockage in the measuring tube which leads to very minimal pressure drop and allows the meter to work with both pure water and water with some solids.
Non Return Valves
DI Pipe Fittings
HDPE Pipe Fittings
Mechanical Water Meters
Static Water Meters
Water Meter Test Bench