Desalination is a process in which mineral components are taken away or filtered from saline water. Desalination refers to the removal of salts and minerals from a target substance. Seawater typically is very salty (TDS >35,000 mg/l) therefore requires a series of filtration that takes away the salinity and TDS to produce freshwater.
Dutco Tennant brings a range of Sea Water Composite Reverse Osmosis membranes in order to meet the demands of the Gulf Countries which mainly rely on desalination for water requirements. Depending on the desired product, there is a range of Sea Water Membranes that Dutco Tennant offers. Each of these SeaWater Range of RO Membranes is applicable to certain feed water and systems and most are produced for our clients to receive the highest productivity and salt rejection.
Not just for desalination of seawater, but also for industries which will be treating wastewater with fairy high TDS, our range of seawater RO membranes will be applicable and highly effective given the proper design in the system which can be advised by our water treatment experts.
If you are not sure on which seawater membrane is required, our group of experts can help you depending on your feed water and product water quality, Dutco Tennant can offer you the best SWC RO membrane suitable membrane for your water treatment plant. You can get the highest level of reliability, quality, and accuracy, with limited costs and many possibilities of configuration and application by choosing our range of Sea Water Reverse Osmosis Membranes.
Dutco has years of experience in dealing with seawater reverse osmosis filtration membranes which are important to make sure that the water that you are getting is up to the standard of the local municipality and as well as satisfactory for the application whether it’s for seawater, brackish water or greywater.
Our group of technical people are knowledgeable and trained to design the best suitable solution or method in which the system will best cater to your requirement as well as to make sure that systems will be installed, commissioned, and run at optimum conditions.