Dutco Tennant LLC provides Dismantling Joints ranging from 80 mm to 1000 mm in diameter, and other ranges as well. Our dismantling joints have operating temperatures range between -10 °C to +80 °C and they can be specially produced for requested requirements.
We have Dismantling Joints which are the telescopic type with interconnected 2 piece design fittings which help to install and dismantle of valves on a pipeline. You can configure the Dismantling Joint to change its full length and elongate it and shorten it as per the requirement to fit into the gap between the components’ flanges and the joint itself.
TSE Dismantling joints of different types are supplied by us. Our Telescopic Dismantling joints have been designed to temporarily replace valves or other elements in the tubing, because of maintenance or repair. Hence water irrigation network continues to work without interruption.
Our TSE Dismantling Joints are used for valve assembly and dismantling. Our Dismantling joints absorb the axial and angular movements of pipes where they are fitted. Our TSE Dismantling Joints are for applications in irrigation network and landscaping network.
Due to the simplicity and versatility of the fittings, they are suitable for many applications including pumping stations, water treatment works, sewage treatment works, plant rooms, meter chambers, power generation equipment, and gas distribution stations. Our supplied dismantling joints are mainly suitable for simplifying the installation & removal of isolation valves, control valves, check valves, non-return valves, flow metering valves, pump sets, pressure reducing valves, flanged pipe & fittings.
What are the applications of our Dismantling Joints?
Features and benefits of using our products:
For applications where a full-face flange is required, the flange of the spigot piece provides a full flange sealing area. The flange adaptor and flange spigot are coated with WRAS approved Rilsan Nylon 11 which provides excellent protection from transport, storage, site and corrosion damage. The EPDM gasket is compressed independently of the tie bars with the sealing capability secured as soon as the fasteners reach required torque. They are simple to fit.