Solenoid Valve For Agriculture and Horticulture

Dutco Tennant LLC provides good-quality agriculture & horticulture Solenoid Valves. The Valves are so called because they have spherical body shape. These valves are used for regulating flow in frequent and throttling operation applications. There is an opening inside the Valve’s body which forms the seat on to which the disc is screwed to shut the valve. The Valves in this category have a slightly higher pressure drop than other straight through valves – such as Ball valve or Gate valve – if they are used for on/off duty. Solenoid Valves are uni-directional, and you must install them in the correct flow position. You can use Releasing Solenoid valves for pressure release from the Pressure Chamber letting the push rod and roller assembly, to move off the clapper assembly and activate the Valve. Usually, releasing solenoid valves are closed valves. Once you energize the releasing circuit, the solenoid goes to its open position letting water flow through the valve. We provide Solenoid Valves from the world’s leading manufacturers. We are a leading Solenoid valve provider in the Middle East and GCC area.Dutco Tennant LLC provides good-quality agriculture & horticulture Solenoid Valves. The Valves are so called because they have spherical body shape. These valves are used for regulating flow in frequent and throttling operation applications. There is an opening inside the Valve’s body which forms the seat on to which the disc is screwed to shut the valve. The Valves in this category have a slightly higher pressure drop than other straight through valves – such as Ball valve or Gate valve – if they are used for on/off duty. Solenoid Valves are uni-directional, and you must install them in the correct flow position. You can use Releasing Solenoid valves for pressure release from the Pressure Chamber letting the push rod and roller assembly, to move off the clapper assembly and activate the Valve. Usually, releasing solenoid valves are closed valves. Once you energize the releasing circuit, the solenoid goes to its open position letting water flow through the valve. We provide Solenoid Valves from the world’s leading manufacturers. We are a leading Solenoid valve provider in the Middle East and GCC area.

Why our Solenoid Valves are best:

• They are 2-way micro valves.
• Features ¾ inch male thread BSP.
• Solenoid Valve’s body is made with Nylon 6.6 with 30% fibre-glass.
• The Valves are permanently clean as they have built-in steel mesh filter.
• They have been assembled with screws and stainless steel spring.
• Valves are made with Nitrile diaphragm.
• Supports wide temperature range from between 2 and 80 degrees.
• The Valves have recommended working pressure between 1 to 10 bar.
• Opening and closing response time of half second.
• Resistance test have been carried out for the Valves at high temperature and pressure conditions for repeated performance.
• Complies with international standards.