Why Pipe Supports are important for the safety of your building
When people think about fire protection appliances or systems, they do not often think about pipe supports. Water sprinklers, fire hydrants, water hoses, etc, are some of the fire protection systems that are directly involved in the extinguishing process. However, the valves, the pipes, and the pumping systems that make the whole process possible should not be neglected either. In all the aforementioned appliances, water is the main element that puts out the fire. Thus, although we need sprinklers and hoses to put out the fire if water is not supplied to them properly, it can be a huge danger.
To maintain a proper flow of water through the pipelines and into the appliances, interior and exterior accessories are highly advisable. Interior accessories include valves, strainers, etc, whereas exterior accessories include clamps, hangers, and channel support systems. While interior equipment makes sure that the water is flowing smoothly, and that there is no backflow, the exterior supports systems are used to support piping systems under thermal, seismic, and other dynamic load conditions. We at Dutco Tennant supply all kinds of support systems for fire water systems. These supports make sure that the pipes are in proper condition, and the channel support systems can also be used to install sprinkler pipelines.
Main uses of Pipe Supports:
- Prevents extra stress and reduces the load from the pipe during overloading.
- Clamps are vital in ensuring all pipes are fixed securely while also allowing for any pipe movement or expansion that may occur.
- Hangers are used to suspend stationary non-insulated pipe lines, including CPVC pipes, in fire sprinkler systems.
- Channel support systems are used for the installation of sprinkler pipelines. Since the pipes in a sprinkler system is concealed, installers generally attempt to run the pipe in the natural channels which parallel the structural members
How much support does your pipeline need?
This is a commonly asked question because the proper amount of support is required otherwise, the pipe will collapse. There are several factors which determines the amount of support that is required, and they are listed below:
- The weight of the liquid is one of the main factors. Heavier fluids or fluids with more density will naturally require more support than lighter fluids
- The location where the fluid is mostly concentrated during plumbing will also require more support.
- Larger diameter piping will require fewer supports since they are less prone to deflection.
- Lastly, the temperature also plays a huge role since higher temperature can make the pipes more flexible, which in turn will need more support to keep its stability.
Dutco Tennant are the best suppliers of Pipe Supports
Dutco Tennant supplies pipe supports specifically for water sprinkler systems however, the hanger and clamps can be used in other applications as well. These supports make sure that your pipe does not bend or collapse due to seismic movement, or overloading. Dutco Tennant has over four decades of experience in the industrial sector, and we are the best suppliers of industrial products in the Middle East and GCC region. To learn more about our pipe support systems, contact - +9714-2152799