Gate Valves are a popular choice of valves ideal for both above ground and underground installations. With the right choice of valves, you will be able to eliminate many concerns such as high replacement costs.

The gate valves are installed with the intention of opening or closing services completely. Among different types of gate valves, the use of resilient seated gate valves are quite popular. They are applied for drinking water transmission lines and thus, an expert resilient seat gate valve supplier needs to be selected.

But why are these types of gate valves widely used? Well, below we have enumerated the ultimate benefits that resilient seated gate valves have to offer and probably why they are extensively used.

Keep reading till the end to find out.

Improved sealing performance

The resilient seated gate valves enable the valve functions to offer drop-tight shut off with zero leakage involved. These valves deliver leakage as per the BS EN12266-1 Leakage Rate A standard.

The resilient seal found in its wedge allows them to make contact with the body’s internal surface and the resilient material’s compression further allows them to offer zero-leakage sealing performance.

Also, the base of resilient seat gate valves are smooth and have a plain surface that enables them for free passage of any unwanted particles such as sand or stone from the valve. However, if any impurity passes through when the valve shuts off, the rubber surface shall shut around the impurities as the valve shuts off.

The rubber compound surface will efficiently absorb all the impurities and later will be flushed away when the valve opens up. Now, because of the rubber surface’s excellent compression properties, the surface will regain back into its original shape offering an improved drop-tight sealing performance.

One of the reasons why experts trust the application of resilient seated gate valves since leak-proof sealing is highly demanded for any system.

Reduced operating torques

In comparison to metal seated gate valves, the resilient seat gate valves offer reduced operating torques. The metal seat gate valve requires it to be forced to the sump when the valve is needed to be closed. Without the force, this type of gate valve will not offer adequate sealed effect.

This type of gate valve needs maximum torque for its operation. However, when it comes to resilient seated gate valves, the smooth and plain surface at its base allows for the valve to close fully.

This contributes to reducing the operating torque as only the compression of rubber is needed. This feature also makes an influence in reducing power consumptions when electrical actuators are used.

Flexible Installation

In comparison to metal seat gate valves, the resilient seat gate valve offers flexible installations. The metal seated gate valves require more than 10% of vertical orientation installation if the space is constraint.

But that’s not the case with a resilient seated gate valve. The vulcanized wedge of this type of valves helps in easy and flexible installations without the risk of causing any damage to its body or encountering any operational issues that can be observed in case of metal seated gate valves.

So, what are you waiting for? Make sure to choose a resilient seat gate valve supplier over a metal seat gate valve and enjoy all the value-added benefits.