• Dutco Tennant LLC, PO Box 233, Dubai, U.A.E.

A well designed irrigation & landscaping system has good air and water controls.  If the hydraulic design of your irrigation system is not good enough, it can lead to pressure variations and water hammer effects which can damage pumps, valves and other equipment, and decrease flow efficiency as well.  We are a reputed stockist of pneumatic control valves and control valve stockist in U.A.E.

Flow control valves play a very important role in the water systems. Automatic control valves are designed to control the flow of water in the irrigation pipeline by adjusting to changes in the landscaping system and automatically regulating the valve. A control valve’s use is determined by the pilot or the control mechanism used with the valve. A control valve finds use in different applications - as a pump control valve, a pressure reducing valve, a pressure sustaining valve, or an altitude valve.

Control valves can be used with high pressure booster pumps, they also act as check valves for the rush protection for the system. For example, a water irrigation pump may move huge amount of water in a minute from a reservoir or other water source and can lead to severe pressure surges called water hammer effect in the water transmission system.

Dutco Tennant LLC provides pneumatic control valves that have been specially designed for use in high pressure irrigation lines. We provide a wide range of flow control valves that can be used anywhere in the irrigation & landscaping. For us at Dutco Tennant LLC, complete client satisfaction is a main concern and we can help our customers well through our automatic control valves which are trustworthy, cost-effective and give the best possible output in every application.

In irrigation system, you got to have complete flow control over water. A control valve for irrigation must control the amount of water used for watering the fields. We provide both small and large-diameter valves that ensure a full opening and don’t obstruct the flow of water. Some of the common control valves for high pressure water transmission lines that we supply are Pressure Relief / Pressure Sustaining Valve, Flow Control valve – Diaphragm Type, Pressure Reducing Valve, Altitude Valve/ Level Control Valve, Flow Control Valve – Axial Type and others.

The Features of Control Valve:

  • Irrigation pipeline pressure is controlled by lessening excess flow.
  • Acts as a pressure relief valve.
  • You can easily control the pressure setting of these irrigation water control valves.
  • Can be used with booster pumps and pump suction Line.
  • We supply control valves that have body as both Globe Type and Angle Type.
  • All Valve body parts are made up of industry approved ductile iron.
  • Covered by Non Toxic Epoxy coatings.
Pressure Relief / Pressure Sustaining Valve

Pressure Relief / Pressure Sustaining Valve

Flow Control Valve - Diaphragm Type

Flow Control Valve - Diaphragm Type

Pressure Reducing Valve

Pressure Reducing Valve

Altitude Valve/ Level Control Valve

Altitude Valve/ Level Control Valve

Flow Control Valve - Axial Type

Flow Control Valve - Axial Type