Reliable Wastewater Handling for Municipal & Industrial Applications
Mody Pumps offers a comprehensive range of submersible wastewater pump solutions for sewage and wastewater handling across municipal, commercial and industrial applications. The range includes the MSP Series, MS 6150 Series, MH 480 Manhole Pump and MSPG Grinder Pump Series, giving projects different options based on flow, head, solids size and installation requirements.
Designed for submerged operation, these sewage pumps combine heavy-duty motors, corrosion-resistant components and reliable sealing arrangements for demanding wastewater environments. Different hydraulic configurations are available to manage wastewater containing suspended solids and other difficult materials.
The range covers everything from high-capacity sewage transfer to restricted-access manhole pumping and grinding applications. This allows the appropriate sewage submersible water pump to be selected according to the actual wastewater characteristics rather than relying on one pump design for every duty.
Explore wastewater pumps, including MSP, MS 6150, MH 480 and MSPG series, for wastewater and sewage applications. Dutco supplies Mody solutions for reliable wastewater pumping systems across collection, transfer and treatment facilities.
Reliable Performance for Continuous Wastewater Pumping
- Continuous-Duty Operation – Selected Mody pumps use motors intended for continuous service in demanding wastewater environments.
- Class H Insulation – Moisture-resistant motor windings provide protection against elevated operating temperatures.
- Submersible Construction – IP68 motor enclosures on relevant models support continuous submerged operation.
- Thermal Protection – Temperature sensors help protect the motor against overheating.
- Moisture Monitoring – Selected pumps incorporate moisture detection to identify potential leakage into critical areas.
- Long-Term Sewage Transfer – These characteristics support dependable sewer treatment pump operation in treatment plants and pumping stations.
Different Hydraulic Options for Solids, Flow & Head Requirements
- Channel Impellers – Selected models use channel impellers to provide clear passage for sewage and solids-bearing wastewater.
- Large Solids Passage – MS 6150 handles solids up to 4 inches, while MH 480 handles solids up to 3 inches.
- Grinding Capability – MSPG provides a dedicated submersible grinder pump option where solids need to be reduced before discharge.
- High-Head Pumping – MSPG reaches a published maximum shut-off head of 350 ft.
- High-Flow Pumping – MS 6150 reaches a published maximum flow of 3,700 GPM, while MH 480 reaches 1,100 GPM.
- Application-Based Selection – Channel and grinding configurations allow the appropriate grinder pump or sewage pump to be chosen for the wastewater being handled.
Types
Mody's wastewater portfolio includes the MSP Series, MS 6150 Series, MH 480, and MSPG Series. Rather than serving the same pumping requirement, each series addresses a different combination of flow, head, solids handling and installation conditions.
MSP Series – 2.5 to 220 HP
The MSP Series covers a broad power range from 2.5 to 220 HP, making it suitable for wastewater installations ranging from moderate transfer duties to large sewage pumping systems.
- Power range from 2.5 to 220 HP
- IP68 watertight motor enclosure
- VFD-rated motor design
- Cartridge-type double mechanical shaft seal
- Optional closed-loop cooling arrangement for dry-pit or partially submerged continuous operation
- Suitable for municipal and industrial wastewater pumping systems
MS 6150 Series – 14 HP
The MS 6150 Series focuses on high-flow sewage transfer. Its channel impeller and large solids passage make it suitable where substantial volumes of wastewater containing solids need to be moved at relatively low head.
- 14 HP motor
- 10-inch discharge
- Maximum flow up to 3,700 GPM
- Maximum shut-off head of 17 ft
- Handles solids up to 4 inches
- Provides a 14 hp sewage pump option for high-volume wastewater applications
MH 480 – Manhole Pump
The MH 480 is a 10 HP Manhole pump for wastewater and sewage applications where access dimensions can influence equipment selection. Its single-channel impeller provides a clear flow path for solids-bearing wastewater.
- 10 HP motor
- 6-inch discharge
- Maximum flow up to 1,100 GPM
- Maximum shut-off head of 60 ft
- Handles solids up to 3 inches
- Suitable for manholes, wet wells and restricted-access sewage applications
MSPG Series – Grinder Pumps, 7.5 to 20 HP
The MSPG Series addresses wastewater applications where difficult solids need to be reduced before entering the discharge system. It combines grinding capability with significantly higher head than the high-flow sewage models.
- Power range from 7.5 to 20 HP
- 2-inch discharge
- Maximum flow up to 150 GPM
- Maximum shut-off head of 350 ft
- Multi-channel impeller configuration
- Suitable as a submersible grinder pump for solids-containing wastewater
Standout Features & Benefits
Continuous Submerged Operation
- IP68 protection is available on relevant models for submerged service.
- Class H motor insulation supports demanding operating conditions.
- Thermal protection helps reduce the risk of motor damage caused by excessive temperature.
- Suitable for continuous-duty submersible wastewater pumps in sewage stations and treatment facilities.
Protection Against Water Ingress
- Mechanical sealing arrangements separate the motor from the pumped wastewater.
- Selected models include moisture-monitoring provisions.
- Watertight cable-entry arrangements help protect electrical connections.
- These features support reliable operation of a sewage submersible water pump in demanding wet environments.
Durable Shaft & Bearing Arrangement
- Selected MSP and MSPG models use AISI 431 stainless-steel motor shafts.
- Heavy-duty bearings accommodate radial and axial operating loads.
- MSP and MSPG documentation specifies B10 bearing life greater than 50,000 hours.
- Suitable for demanding wastewater pumps requiring extended operating periods.
Easier Seal Maintenance
- Cartridge-type double mechanical shaft seals simplify servicing on selected models.
- Silicon carbide seal faces provide resistance against abrasion and heat.
- Oil-reservoir lubrication protects the seal faces independently of the pumped liquid.
- This arrangement supports reliable operation in demanding wastewater conditions.
Choice of Solids-Handling Approach
- Channel impellers provide larger passages for sewage and suspended solids.
- Grinder models reduce troublesome solids before discharge.
- Different pump families cover high-flow, high-head and restricted-access requirements.
- This gives sewage pumps greater flexibility across different wastewater applications.
Application Areas
Municipal Sewage Pumping Stations
- Suitable for moving raw sewage through collection and transfer networks.
- Different pump capacities accommodate varying station requirements.
- Useful for permanent installations requiring continuous wastewater movement.
Wastewater Treatment Plants
- Supports wastewater movement between different stages of the treatment process.
- Solids-handling configurations are available for streams containing suspended material.
- Provides dependable wastewater pumps for treatment and transfer applications.
High-Flow Sewage Transfer
- MS 6150 delivers a published maximum flow of 3,700 GPM.
- Its 10-inch discharge and large solids passage support substantial sewage volumes.
- The 14 hp sewage pump is particularly suited to high-flow, lower-head applications.
Manholes & Restricted-Access Locations
- MH 480 provides a dedicated Manhole pump configuration.
- Its 6-inch discharge and solids handling up to 3 inches suit wastewater collection applications.
- Useful where available access influences the size and configuration of the pump.
Wastewater with Large Solids
- MS 6150 handles solids up to 4 inches.
- MH 480 handles solids up to 3 inches.
- Channel impellers provide clear passages for solids-containing wastewater.
- Suitable for collection systems and treatment facilities dealing with difficult sewage streams.
Grinder Pump Applications
- MSPG reduces solids before the wastewater enters the discharge line.
- Maximum shut-off head of 350 ft supports higher-pressure sewage transfer.
- The grinder pump is suitable where solids reduction and higher head are required together.
Commercial & Industrial Wastewater
- MSP models span a wide 2.5-220 HP range.
- Different capacities allow selection according to actual site flow and head requirements.
- VFD-compatible options support systems with changing wastewater demand.
- Suitable for industrial facilities, commercial developments and utility installations.
UAE Wastewater Projects
- Mody's range covers conventional sewage transfer, high-flow pumping, manhole applications and grinding duties.
- Dutco supports projects looking for a wastewater pumps supplier UAE across municipal, commercial and industrial wastewater facilities.
- Customers requiring a wastewater pumps supplier UAE can select the appropriate series according to flow, total head, solids size and installation conditions.
- Together, the four product families provide a flexible wastewater pump range for sewage collection, transfer and treatment applications.
