• Dutco Tennant LLC, PO Box 233, Dubai, U.A.E.
Modulating / Non Modulating Float Valves Treated Sewage Effluent (TSE)

Description

106 / 206-A-Type 2 One-Way Flow Altitude Control Valve

The 106-A-Type 2 and 206-A-Type 2 altitude control valves are based on the 106-PG or 206-PG main valve and are ideal for maintaining a preset maximum water level.

The valve functions as a two position control valve, either fully open or fully closed. The Type 2 valve allows normal forward flow to fill the reservoir to the maximum level and then closes drip-tight at the set-point. It opens to refill the tank once the level drops a fixed distance below the high water level.

Note: This valve does not operate as a check valve to prevent reverse flow

Social Media Share
. . . .
0/5 (0)

My Rating Form

  • No overflows - high level shut-off maintained to close tolerances
  • Superior repeatability
  • Positive shut-off
  • Easily serviceable at ground level
  • LEVEL CONTROL VALVE : Supply a insert size Singer Model specify model as 106/S106/206/S206– A-Type 2 One-Way Flow Altitude Control Valve.
  • Function: The valve shall be a non-modulating one-way flow altitude control valve which shall maintain a preset maximum reservoir level.
  • Quality Assurance :  A. The control valve shall be tested prior to shipment. The standard test shall include a functional stroke test and pressure and leak test of valve body, seat, fitted pilots and accessories.  B.   The control valve shall be covered by a minimum three (3) year warranty against defects in materials and workmanship. The 316 stainless steel seat ring shall be covered by a lifetime guarantee.
  • Main Valve : A. The main valve shall be a Singer specify main valve model number(106/S106/206/S206)-PG single chamber, diaphragm actuated specify (full/reduced) port model. B. Main valves, 6” (150mm) and larger, shall provide smooth frictionless motion to ensure a low flow stability to specify minimum USGPM or L/s, achieved using SRD-Single Rolling Diaphragm technology.