• Dutco Tennant LLC, PO Box 233, Dubai, U.A.E.
Non Rising Stem Gate Valve Treated Sewage Effluent (TSE)

Description

We provide the wedges and stem technology that ensures the smooth functionality with outstanding low torque valves. The Bayonet stuffing nut with three o-rings to guarantee the tightness thought out the stem. Non Rising Stem gate valve are usually made from brass, bronze and cast iron. The non-rising stem gate valve, is usually suitable for tight places where there is not enough room for the stem to raise, for example, places with underground pipes. It is fully open when the handle is rotated as far as possible to the left and fully closed when the handle is rotated as far as possible to the right.
Social Media Share
. . . .
0/5 (0)

My Rating Form

New guiding system for the wedge with male composite sliding skate in order to easily achieve the 2500 cycles enurance test required by European standards

  •  Body Length : long pattern (serie S15) and short pattern (serie S14), according to  EN 558
  • Body Length : long pattern (serie S15) and short pattern (serie S14), according to  EN 558
  • Nominal Pressure : PN16
  • Flange drilling : PN10 or PN16 according to EN 1092-2
  • Temperature : Epoxi coating :- 10C a+ 50C                       Enamel coating :- 10C a 70C

Related Products