Reliable power infrastructure depends not only on the quality of electrical cables but also on how securely those cables are supported and restrained. During normal operation, cables can be affected by their own weight, vibration and thermal movement. During a short-circuit fault, they may be exposed to significantly higher mechanical forces.

At Middle East Energy 2026, we are bringing you the opportunity to explore Peace Power's Cable Cleats & Clamps, engineered to help maintain cable position and stability under mechanical and fault forces. For professionals looking for an electrical cable cleats supplier at MEE Exhibition, our showcase will provide a closer look at cable restraint solutions for different power and infrastructure applications.

Why Are Cable Cleats Important?

Electrical cable cleats are mechanical restraints used to secure cables to supporting structures such as cable trays, ladders and channels.

Their role goes beyond keeping an installation neat and organised. During a short circuit, high currents can generate powerful electromagnetic forces between conductors. Without adequate restraint, these forces can cause sudden cable movement and place additional stress on insulation, joints, terminations and supporting equipment.

Properly selected power cable cleats can help maintain the intended cable position, minimise excessive movement and preserve the required cable formation.

This makes them an important consideration when designing reliable cable systems for demanding electrical installations.

Explore Cable Cleats for Different Installation Requirements

Every cable installation has different mechanical and electrical requirements. Cable diameter, formation, fault current, installation environment and supporting structure can all influence the type of restraint required.

Through our association with Peace Power, we offer Cable Cleats & Clamps for a range of LV, MV and HV applications, including single-cable and trefoil configurations.

Single Cable Cleats

Single cable cleats are designed to secure individual cables along trays, ladders and other supporting structures.

They help maintain the required positioning and spacing while restricting unwanted movement. This makes them suitable for installations where individual cables need to be securely restrained throughout the cable route.

Trefoil Cable Cleats

Three single-core phase cables are often installed in a triangular arrangement known as trefoil.

Trefoil cable cleats are designed to maintain this formation and provide mechanical restraint to the three cables. During fault conditions, a properly selected trefoil cleat helps prevent excessive movement caused by electromagnetic forces.

They are particularly relevant to high-current three-phase power installations where maintaining the designed cable formation is essential.

Aluminium Cable Cleats

An aluminium cable cleat provides a combination of mechanical strength, relatively low weight and durability.

These characteristics make aluminium solutions suitable for various utility, industrial and infrastructure applications where dependable cable restraint is required.

HV Cable Cleats

Cable restraint becomes particularly important in high-power applications where short-circuit forces can be substantial.

HV cable cleats and high voltage cable cleats are used to keep cables securely restrained under these demanding conditions. Peace Power's range covers cable-cleat solutions for LV, MV and HV applications, providing options for different cable arrangements and project requirements.

Performance for Demanding Cable Installations

When selecting cable cleats, mechanical performance needs to be considered alongside the electrical characteristics of the system.

Peace Power's Single Omega Aluminium Cable Cleats have been independently tested for short-circuit withstand performance of 50 kA for 1 second in accordance with IEC 61914:2021.

This provides engineers, consultants and contractors with useful technical information when assessing a cable-cleat system for demanding installations.

However, tested performance is only one part of the selection process. The suitability of a cleat should also be evaluated against the actual cable dimensions, formation, prospective fault current, required spacing, supporting structure and site conditions.

Applications of Power Cable Cleats

Cable cleats are used wherever secure cable positioning and mechanical restraint are important.

In power transmission and distribution, they can support cable installations in substations, cable tunnels and other critical sections of the network. Power generation facilities also depend on secure cable routes to support reliable operation.

For renewable-energy projects, appropriate cable restraint can contribute to dependable electrical connections between generation equipment, substations and the wider network.

Industrial plants can present additional challenges such as vibration, heat and harsh operating conditions, while transport and infrastructure projects may contain extensive cable routes where stable positioning is required over long distances.

The right cable-cleat arrangement should therefore reflect the conditions of the individual project rather than being treated as a standard accessory choice.

What Should You Consider When Selecting Cable Cleats?

Selecting the right cleat involves more than matching the product to the outside diameter of a cable.

We recommend considering the complete installation, including:

  • Cable dimensions and construction
  • System voltage
  • Single or trefoil cable formation
  • Prospective short-circuit current
  • Fault duration
  • Required cleat spacing
  • Mounting arrangement
  • Strength of the supporting structure
  • Installation environment
  • Applicable project specifications

The cable tray, ladder, channel or other supporting structure must also be capable of handling the forces transferred through the cleats.

Looking at these factors together helps create a cable restraint arrangement suited to the electrical and mechanical demands of the installation.

Explore Peace Power Cable Cleats with Us at MEE 2026

Middle East Energy gives us an opportunity to connect directly with engineers, utilities, EPC contractors, consultants and project teams looking for solutions for upcoming electrical infrastructure projects.

This year, we will be showcasing Peace Power Cable Cleats & Clamps, including solutions for single-cable and trefoil configurations, aluminium cable cleats and demanding HV cable applications. Our team will be available to discuss your cable size, configuration, fault requirements, installation conditions and other project considerations to help identify an appropriate solution.

If you are attending Middle East Energy 2026 from 1–3 September at Dubai World Trade Centre, Dubai, UAE, visit us at Hall H5, Stand D10. Explore Peace Power's cable restraint solutions with our team and discover how the right power cable cleats, electrical cable cleats, trefoil cleats, aluminium cable cleats and HV cable cleats can contribute to safer, more stable and reliable cable installations.

We look forward to welcoming you at MEE 2026 and discussing how we can support your upcoming power and infrastructure projects.