In heating and cooling systems, delivering the right amount of water is just as important as maintaining the desired temperature. Excessive flow, fluctuating thermal loads, and inefficient hydronic balancing can increase energy consumption and affect indoor comfort. Conventional control arrangements may regulate water flow, but modern HVAC installations increasingly require solutions that can also measure energy use, respond to changing demand, and provide operational insights.

At the dubai big 5 exhibition, Dutco Tennant LLC will introduce the Knolval Smart Energy Valve from Cimberio, an advanced solution that combines flow regulation, energy measurement, and intelligent monitoring within a connected HVAC control system.

As part of Big 5 Global Exhibition 2026, taking place from 23–26 November 2026 at Dubai World Trade Centre, Knolval will highlight how smart hydronic control technologies can contribute to more efficient heating and cooling operations in commercial and industrial buildings.

Knolval Smart Energy Valve: More Than Conventional Flow Regulation

Traditional balancing and control valves primarily manage water distribution through HVAC circuits. Knolval takes this functionality further by incorporating measurement, electronic control, and communication capabilities into an integrated energy management solution.

Developed by Cimberio, Knolval CIM-9750 is an ecosystem of electronic valves and monitoring technologies intended for commercial and industrial heating, ventilation, and air-conditioning installations.

The system transforms conventional flow regulation into an active process by measuring operating conditions and adjusting the amount of heat transfer fluid supplied to HVAC terminals.

Its integrated capabilities include water flow measurement, inlet and outlet temperature monitoring, thermal energy calculation, and electronic valve position control. These functions allow the system to respond to changing thermal demand rather than relying solely on fixed operating conditions.

The solution can be incorporated into new HVAC installations or used to upgrade existing systems, making it relevant for building modernisation and energy efficiency projects.

How Knolval Improves Hydronic System Performance

A hydronic HVAC system distributes heating or cooling energy through water circulating between generation equipment and terminal units. When water flow is not properly matched to actual demand, system performance can suffer.

Knolval addresses this challenge through an integrated combination of electronic flow regulation, sensors, and control technology.

Intelligent Flow Adjustment

The Intelligent Hydronic Control Valve continuously uses measured operating parameters to regulate water flow according to system requirements.

Rather than maintaining unnecessarily high flow rates, the valve can adjust its opening to respond to changing thermal loads and configured temperature, flow, or power requirements.

This demand-responsive operation helps reduce inefficient water circulation and supports improved distribution of thermal energy.

Integrated Energy Measurement

Knolval incorporates an electromagnetic flow sensor and temperature measurement capabilities to determine the thermal energy exchanged by an HVAC terminal.

The flow sensor supports bidirectional measurement and is suitable for compatible water and glycol mixtures. Its measurement principle also helps maintain reliable readings in the presence of small air bubbles within the system.

By combining flow and temperature information, the Smart Energy Valve provides data that can be used to assess heating and cooling consumption at individual measurement points.

Dynamic Hydronic Balancing

Hydronic balancing is necessary to distribute appropriate water quantities across different branches and terminal units.

Knolval supports automatic flow adjustment as operating conditions change, helping maintain suitable distribution without relying exclusively on fixed balancing settings.

This makes the system relevant for projects requiring a Smart Balancing Valve that can contribute to continuous hydronic optimisation.

Smart Energy Valve

Technical Features of the Knolval CIM-9750

The Knolval CIM-9750 combines several functions that would otherwise require separate measurement and control components.

Feature Function and benefit
Electronic regulating valve Adjusts water flow according to configured operating requirements
Electromagnetic flow sensor Measures flow in compatible water and glycol-based HVAC circuits
Temperature measurement Monitors inlet and outlet water temperatures
Thermal energy calculation Supports heating and cooling energy measurement
Integrated electronic control Responds to variations in thermal load and system conditions
BMS communication Supports integration with compatible building management systems
Remote monitoring Enables access to operating data for supervision and analysis
Compact assembly Combines valve and flow measurement functions within one arrangement

The CIM-9750 range includes valve sizes from ½ inch to 2 inches. Its regulating assembly uses a two-way ball valve manufactured from DZR lead-free brass alloy, together with an electric actuator incorporating position indication and emergency manual operation.

Communication capabilities include Modbus-based connectivity, supporting integration with compatible building automation arrangements.

These features make Knolval relevant for consultants evaluating an HVAC Flow Control Valve that offers both regulation and measurement within the same system.

Addressing Low Delta T and Unnecessary Energy Consumption

One of the recurring challenges in chilled-water installations is low delta T, where the temperature difference between supply and return water becomes smaller than intended.

When this occurs, more water may need to circulate to deliver the required cooling capacity. Depending on the system configuration, this can increase pumping requirements and affect overall plant efficiency.

Knolval's ability to measure water flow, temperature, and exchanged thermal energy provides useful information for identifying these operating conditions.

Through its integrated control functions, the valve can adjust flow according to thermal demand and help improve the relationship between water circulation and delivered heating or cooling energy.

Cimberio's wider energy management platform also supports distribution pump control and operating strategies intended to address low delta T conditions.

For facilities seeking Energy Efficient HVAC Systems, this combination of measurement and control provides a more informed approach to managing hydronic performance.

Actual energy savings depend on the existing installation, control strategy, operating conditions, and system commissioning.

Smart HVAC Control with Building Management System Integration

The effectiveness of intelligent HVAC equipment increases when measurement information can be incorporated into wider building management operations.

Cimberio Energy Efficiency combines Knolval with sensors, meters, controllers, and software solutions that support connected building energy management.

Its Niagara-based platform enables data exchange between compatible equipment and provides centralised monitoring, analysis, and control of HVAC systems.

This integration supports several operational activities:

  • Plant Supervision: Monitoring equipment operation and identifying deviations from expected conditions.
  • Energy Analysis: Reviewing consumption information to identify opportunities for improvement.
  • Performance Benchmarking: Comparing operating performance across systems or facilities.
  • Predictive Maintenance: Using monitoring information to support maintenance planning.
  • Operational Optimisation: Adjusting system settings based on measured performance and demand.

For projects considering a Smart HVAC Valve UAE, these capabilities are particularly relevant where building operators require greater visibility into HVAC performance and energy consumption.

The wider platform can also support interoperability with compatible building automation technologies, allowing HVAC information to contribute to broader facility management strategies.

Where Can Knolval Smart Energy Valves Be Applied?

Knolval is intended for commercial and industrial HVAC installations, including both new systems and suitable retrofit projects.

Commercial Buildings

Office complexes and mixed-use properties often experience varying cooling loads throughout the day. Intelligent flow regulation can help match water distribution to changing occupancy and operating requirements.

Hotels and Hospitality Facilities

Guest rooms, public spaces, and service areas may have different temperature requirements. Smart hydronic control can support more responsive HVAC operation across these varied environments.

Shopping Centres and Retail Developments

Retail facilities contain multiple zones with different cooling demands. Flow monitoring and dynamic regulation can help maintain appropriate water distribution across connected circuits.

Industrial Facilities

Industrial buildings may require dependable temperature regulation and continuous monitoring of HVAC equipment. Knolval provides measurement and control capabilities for compatible hydronic installations.

Existing Building Modernisation

Retrofitting conventional HVAC controls with intelligent valves can introduce additional monitoring and adjustment capabilities without necessarily replacing the entire heating or cooling plant.

These applications demonstrate how a Smart HVAC Valve UAE can support different operational requirements when appropriately selected and integrated into the building's hydronic system.

Why Integrated Measurement and Control Matter for Modern HVAC Projects

In conventional HVAC installations, flow regulation, thermal energy measurement, and operational monitoring may be handled by separate components.

Integrating these functions offers several advantages for building owners, consultants, and facility managers.

Improved Operational Visibility: Flow, temperature, and thermal energy information provide a clearer picture of how individual HVAC circuits are performing.

Responsive System Control: Electronic regulation allows water distribution to adapt to changing thermal demand.

More Informed Maintenance: Monitoring data can help identify unusual operating patterns before they develop into larger performance problems.

Energy Management Opportunities: Better control of water circulation can help reduce unnecessary pumping and thermal energy consumption.

Simplified System Integration: Combining valve control and measurement functions can reduce the need for separate field devices in suitable applications.

Knolval represents an approach in which an HVAC Flow Control Valve becomes an active component of building energy management rather than functioning only as a mechanical regulating device.

Discover Cimberio Knolval at Big 5 Global 2026

The shift towards intelligent HVAC operation is creating new opportunities to improve energy management across commercial and industrial buildings. Technologies that combine accurate measurement with responsive control can help facility operators understand system behaviour and make more informed operational decisions.

At Dutco Tennant LLC, we will showcase Cimberio's Knolval Smart Energy Valve during Big 5 Global Exhibition 2026, highlighting its role in hydronic balancing, thermal energy monitoring, and connected HVAC management.

The exhibition offers an opportunity for MEP consultants, HVAC contractors, developers, and facility management professionals to explore how intelligent valve technologies can be incorporated into new installations and existing building systems.

Meet Us at Big 5 Global 2026

Date: 23–26 November 2026

Venue: Dubai World Trade Centre

Hall: 3 | Stand: 3A141

We welcome visitors attending the Dubai big 5 exhibition to explore Knolval's capabilities and discuss how intelligent hydronic control can contribute to more efficient, responsive, and sustainable building operations.