• Dutco Tennant LLC, PO Box 233, Dubai, U.A.E.
Brass - Ball Valve Plumbing Products

The Brass-Ball Valves are full port, 2-pice and are meant to be used in a complete range of industrial and commercial gases and liquids. They are having a stem that is blowout-proof, the steel handle and the brass ball are chrome plated. The end connections are mostly solder end or threaded. These types of Bal Valves are very common types and are used in Waterworks, Plumbing and HVAC. They can be worked with very easily and are easy to install. They can suit a wide range of applications where the resistance to corrosion is not an issue.

Brass Ball Valves offer the biggest benefit in that they are very easy to use and can be installed easily. They are easy to work with because as a material brass is much softer compared to others. This makes them very easy to seal. Again because of the huge popularity of these valves, the products which are used to seal them can be found very easily. When you are sealing another type of metal, you will often be needing a specified type of tape or threading sealant. They may not be impossible to find but you are more apt to find the brass sealing products much easily. The last few years have seen a transition to the No lead and the products of Brass needed to quite drastically change themselves. There is an underlying big price difference among the no lead and led brass from the perspective of material and this is nice to have the option of using leaded variant for the non-potable applications of water. This can help in saving a huge amount of money. For a wide range of applications, Ball Valves can be used. Mostly brass is an amazing option. When it is about plumbing or other waterworks. If the water is not corrosive like a high amount of salt present, then-No Lead Brass is an amazing option. For these cases, other materials like PVC or stainless steel will be working better. Other materials which are also Lead-free like Stainless are become possible options due to the cost of the no-lead brass.

The Brass Ball Valves are mostly meant for Commercial and Residential Plumbing, HVAC and waterworks with some other additional applications. As long as there are no corrosive properties in what is mostly going via the valves, brass is an amazing material of choice. If you are looking for the finest range of plumbing valve suppliers in the Middle East, then Dutco Tennant LLC is the place to be.


  • Screwed BSP Taper Ends (ISO 7/1) or NPT (ANSI B1.20.1)
  • Anti-Blow-Out Stem
  • PTFE Seats & Seals
  • Full Bore
  • WRAS Approved

Technical Data

Max Pressure 40 Bar
Working Temperature -20ºC to +130ºC